JavaScript seems to be disabled in your browser.
You must have JavaScript enabled in your browser for full functionality of this website.
 

Concrete Anchors & Fasteners is Our Specialty   Questions? Contact Mike   

You have no items in your shopping cart.
Free Shipping
For orders $25
or more within
the USA

1/2" x 3" 410 Stainless Steel Large Diameter Tapcon (LDT), 25/Box

   Availability: In Stock
  Questions? Email Mike

$170.06 per Box of 25
    Payment types
Purchase the 1/2" x 3" 410 Stainless Steel Large Diameter Tapcon direct and earn free freight. All orders ship immediately.
SKU: LDTS123

 

Customer Reviews

ITW/RedHead - 1/2" x 3" 410 Stainless Steel Large Diameter Tapcon®

The 1/2" x 3" (three inches) 410 Stainless Steel Large Diameter Tapcon® are packaged 25 pieces per box. Designed for use in most masonry materials, such as solid concrete, brick or block. Order will ship same day received and should arrive within 1 to 3 business days.

  • Bit size 7/16"
  • Minimum embedment 2"
  • Made in U.S.A
  • Made from 410 stainless steel
  • No assembly required
  • One piece design
  • Head has attached washer and serrated
  • Fast and easy to install
  • Can be easily removed
  • 1/2" inch is the diameter, 3" (three inches) inch is the length
  • Over $25.00 qualifies for free freight
Products specifications
Bit Size 7/16"
Minimum Embedment 2"
Thread Type Hi-Lo
2000 PSI Concrete - Pull-Out (lbs.) * 3580
2000 PSI Concrete - Shear (lbs.) * 2108
Type Male
Diameter 1/2"
Length 3"
Material 410 Stainless Steel
Environment Moist
Box Qty 25
Minimum Spacing 8"
Minimum Edge Distance 5"
Maximum Fixture Thickness 1"
Minimum Fixture Hole Diameter (In Place) 9/16"
Minimum Fixture Hole Diameter (Hole Spotted) 9/16"
Length ID Code D
Wrench Size For Nut 3/4"
Head Type Hex Washer Serrated
Length Measurement Underneath head
Driver Size 3/4"
Brand Name ITW/RedHead

Applications
The 1/2" x 3" (three inches) 410 Stainless Steel Large Diameter Tapcon® is made from 410 Stainless Steel. This anchor is designed for use in concrete, block, and brick.

Environment
The anchor is designed for use in an outdoor, moist environment.

Head Style
The 1/2" x 3" (three inches) 410 Stainless Steel Large Diameter Tapcon® is a Hex Washer Serrated head and is designed to allow the head to sit on top of the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 7/16" hole to be drilled in the base material (concrete, block, and brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Driver Required
A 3/4" nut driver is required for driving the 1/2" x 3" (three inches) 410 Stainless Steel Large Diameter Tapcon® into the base material.

Diameter of Anchor
The diameter of the 1/2" x 3" (three inches) 410 Stainless Steel Large Diameter Tapcon® is 1/2".

Length Anchor
The length of the anchor is 3" (three inches), and is measured from underneath the head.

Packaging
The 1/2" x 3" (three inches) 410 Stainless Steel Large Diameter Tapcon® is packaged with 25 pieces per box.

Minimum Embedment
The anchor minimum embedment into the concrete is 2". Therefore, the anchor must be installed so that a minimum of 2" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a 1/2" x 3" (three inches) 410 Stainless Steel Large Diameter Tapcon® is 1". This will ensure that the minimum embedment of 2" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor . The 1/2" diameter anchor requires the hole in the fixture to be 9/16".

Wrench Size
The size of the wrench required to turn the nut to set the 1/2" x 3" (three inches) 410 Stainless Steel Large Diameter Tapcon® is 3/4".

Spacing between Anchors
Each anchor must be spaced a minimum distance of 8" from each other when measured center to center.

Edge Distance
It is very important not to install the 1/2" x 3" (three inches) 410 Stainless Steel Large Diameter Tapcon® any closer than 5" from an unsupported edge of concrete.

Markings
The anchor is stamped with the letter D on the threaded end to allow inspection of the anchor after installation. The letter "D" designates an overall length of the anchor as between 3" up to, but not including 3-1/2" in length.

Holding Values - Ultimate Load Values in 2000 PSI Concrete

1/2" x 3" (three inches) 410 Stainless Steel Large Diameter Tapcon® Size

Minimum Embedment

Pull-Out (lbs.)

Shear (lbs.)

1/2" x 3" (three inches)

2"

3580

2108


Product Information

Description

Part number

Quantity per Box

1/2" x 3" (three inches) 410 Stainless Steel Large Diameter Tapcon®

LDTS123

25

*
*
*

* The figures above indicate average ultimate tension and shear failure values. A safety factor of 4:1 or 25% of ultimate value is generally accepted as a safe working load. Reference should always be made to applicable codes.



These bits work with the selected anchor
Back to product