Concrete Anchors & Fasteners is Our Specialty   Questions? Contact Mike   

You have no items in your shopping cart.
Free Shipping
For orders $25
or more within
the USA

3/8" x 3" Large Diameter CONFAST® Screw Blue Ruspert Plated, 50/Box

$35.99 per Box of 50
    Payment types
   Availability: In Stock
  Questions? Email Mike

SKU: LDT383;C
  MFG: CONFAST®


CONFAST - 3/8" x 3" Large Diameter CONFAST® Screw Blue Ruspert Plated

These anchors come packaged with 50 pcs per box and are designed for fastening items to concrete.

  • Bit size 3/8"
  • Minimum embedment 1-1/2"
  • Zinc plated for indoor use
  • Do not use in vibratory loads
  • Packaged with zinc plated nuts and washers
  • 3/8" inch diameter x 3" inch long
  • Spacing must be a minimum of 10 anchor diameters
  • Free freight on all orders over $25.00
Products specifications
Bit Size 3/8"
Minimum Embedment 1-1/2"
Thread Type Hi-Lo
2000 PSI Concrete - Pull-Out (lbs.) * 1336
2000 PSI Concrete - Shear (lbs.) * 2108
Type Male
Diameter 3/8"
Length 3"
Material Grade 5 Carbon Steel, Zinc Plated
Environment Dry
Box Qty 50
Minimum Spacing 6"
Minimum Edge Distance 3"
Maximum Fixture Thickness 1-1/2"
Minimum Fixture Hole Diameter (In Place) 7/16"
Minimum Fixture Hole Diameter (Hole Spotted) 7/16"
Length ID Code D
Wrench Size For Nut 9/16"
Head Type Hex Washer Serrated
Length Measurement Underneath head
Driver Size 9/16"
Brand Name CONFAST

Applications
The anchor is made from Hardened Carbon SteelBlue Rusper. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a dry environment.

Head Style
The anchor is a Hex Washer Serrated head and is designed to allow the head to sit on top of the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 3/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Driver Required
A 9/16" is required for driving the anchor into the base material.

Diameter of Anchor
The diameter of the anchor is 3/8".

Length Anchor
The length of the anchor is 3"

Packaging
The anchor is packaged with 50 pieces per box .

Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/2". Therefore, the anchor must be installed so that a minimum of 1-1/2" of the anchor is embedded into the concrete.

Depth of Hole
The depth of the hole that is required for the anchor should be a minimum of 1/2" deeper than the anchor will penetrate the concrete. This will allow space for dust created during the installation process to fall, which will prevent the anchor from bottoming out in the hole before full penetration into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1/2". This will ensure that the minimum embedment of 1-1/2" will be met.

Wrench Size
The size of the wrench required to turn the nut to set the anchor is 9/16".

Edge Distance
It is very important not to install the anchor any closer than 3" from an unsupported edge of the concrete.

Holding Values - Ultimate Load Values in 2000 PSI Concrete

Anchor Size

Minimum Embedment

Pull-Out (lbs.)

Shear (lbs.)

3/8" x 3"

1-1/2"

1002

1581

*
*
*

Product/Company Reviews

* The figures above indicate average ultimate tension and shear failure values. A safety factor of 4:1 or 25% of ultimate value is generally accepted as a safe working load. Reference should always be made to applicable codes.



* The bits are recommended by diameter and may not necessarily be the length needed for your application. Please make sure the usable length will work for your application. *