JavaScript seems to be disabled in your browser.
You must have JavaScript enabled in your browser for full functionality of this website.
 

Concrete Anchors & Fasteners is Our Specialty   Questions? Contact Mike   

You have no items in your shopping cart.
Free Shipping
For orders $25
or more within
the USA

Hilty

Friday, August 19, 2011
Customer Reviews

 


Purchase Anchors

Hilty is a misspelling of the name Hilti, Inc., which is a company that specializes in fasteners, tools, and accessories for construction trades.  Concrete Fasteners, Inc carries many of the same types of concrete anchors that are equivalent to the type of anchors  that Hilti, Inc. distributes.

Hilti has divided their steel mechanical fastener line into two categories:

Metal Anchors

  • HDA – undercut expansion anchors for heavy duty fastening, provide high holding values and closer to the unsupported edge distance than the standard expansion type anchor.   The HAD anchors are a very specialized concrete anchor, Concrete Fasteners, Inc. does not carry this type of anchor.

  • Kwik-Bolt TZ – designed for use in seismic and cracked concrete applications in medium duty, and available in standard zinc plated carbon steel and stainless steel.  The TZ version of the Hilti Kwik-Bolt is comparable to the Power-Stud SD2@ that Concrete Fasteners, Inc. carries.  The Power-Stud SD2 anchor is a fully threaded, expansion wedge anchor that is torque controlled and is designed for consistent holding values in uncracked or cracked concrete. It is available in the following sizes and can be ordered by calling 216-357-7433:

 

Anchor Size

Thread Length

3/8” x 3”

1-3/4”

3/8” x 3-1/2”

2-1/4”

3/8” x 3-3/4”

2-1/2”

3/8” x 5”

3-3/4”

1/2” x 3-3/4”

2-1/8”

1/2” x 4-1/2”

2-7/8”

1/2” x 5-1/2”

3-7/8”

1/2” x 7”

5-3/8”

1/2” x 8-1/2”

6-7/8”

5/8” x 4-3/4”

2-7/8”

5/8” x 5”

3-1/8”

5/8” x 6”

4-1/8”

5/8” x 7”

5-1/8”

5/8” x 8-1/2”

6-5/8”

3/4” x 5-1/2”

3-1/4”

3/4” x 6-1/4”

4”

3/4” x 7”

4-3/4”

3/4” x 8-1/2”

6-1/4”

 

  • HSL – is a heavy duty torqued controlled expansion anchor for use in static or dynamic loading applications where high performance is required.  The HSL anchor comes in metric sizes and requires the use of metric bits to drill the hole in the concrete. Concrete Fasteners, Inc. does not carry this type of specialized concrete anchor.

 

  • Kwik-Bolt 3 – expansion anchor designed for use in solid concrete, available in zinc plated carbon steel and stainless steel.  Concrete Fasteners, Inc carries this type of expansion anchor, which are available in carbon steel zinc plated, 303 stainless steel, 316 stainless steel and Hot-Dipped Galvanized carbon steel.  All size and types are manufactured in the United States under the Thunderstud brand of concrete wedge anchors.  Click on the following link for technical information. To purchase the American-made Thunderstud wedge anchor, call 216-357-7433, or purchase the standard wedge anchor on-line.

 

  • HLC – sleeve type expansion anchor bolt for use in hollow block, grout filled block, brick or solid concrete.  Available in carbon steel that is zinc plated and in stainless steel with 4 different head styles, acorn, hex, round or flat.  Concrete Fasteners, Inc carries a complete line of equivalent type sleeve anchors.  The sleeve anchor can be purchased from Concrete Fasteners, Inc., which stocks all diameters, lengths and head configurations their Cleveland, Ohio warehouse.

 

  • HCA Coil Anchor – utilizes coil threads for a stud anchor that is easily removed and is reusable.  Additional coils must be purchased to reuse the same anchor in a different hole.  This anchor is a specialized type of concrete fastener that Hilti, Inc. carries. Concrete Fasteners, Inc. does not have an equivalent type of anchor.

 

  • HDI – is a flush mounted female the anchor with internal national coarse threads that comes in five diameters and can be purchased in the standard zinc plated carbon steel or stainless steel.  A short version of the 3/8” is available for use in post-tension concrete applications.  Concrete Fasteners, Inc. carries all five diameters in both zinc plated carbon steel, 304 stainless steel and 316 stainless.  Drop-in anchors have the best and most consistent holding values of any female type anchor in solid concrete.  The drop-in anchor can only be used in solid concrete and should not be used in other masonry base material. 

 

  • HIT – a light duty expansion fastener for use in concrete and masonry that consists of a drive pin and anchor body made of a zinc alloy.  Concrete Fasteners, Inc. refers to their anchor of this type as a hammer drive anchor.  The hammer drive anchor is stocked in both the 3/16” and 1/4” diameter in all lengths in the Cleveland, Ohio warehouse.  To order the hammer drive anchor from Concrete Fasteners, Inc., go to Hammer Drive Anchor.

Screw Anchors

  • Kwik HUS – a threaded concrete fastener that can be used for temporary or permanent applications that have a finished hex head and comes in diameters ranging from 1/4” to 3/4”. The line of equivalent concrete fasteners sold by Concrete Fasteners, Inc. is called the Large Diameter Tapcon, which is available in diameters ranging from 3/8” to 3/4” in diameter and in both zinc plated and 410 stainless steel.  All of the manufactured large diameter tapcons are in stock in Cleveland, Ohio, and will ship the same day the order is placed.

 

  • Kwik-Con – concrete screw that is tri-lobular, providing for higher tensile and shear values in concrete and masonry.  Available in two diameters of 3/16” and 1/4” and in two head styles of hex washer head and flat countersunk phillips.  Concrete Fasteners, Inc. has an equivalent type of concrete screw called the Tapcon®.  The Tapcon® masonry screw is the original concrete screw and is still manufactured in America.  All diameters, lengths, and head styles are in stock in both the standard blue carbon steel and the 410 stainless steel.

 Link to Hilti

Purchase Anchors



 

Always use personal protective equipmentAs with any anchoring project, it is important to keep safety in mind and follow instructions carefully. Always remember to wear safety goggles, handle all tools with extra care and follow all technical specifications. This article is meant to serve only as a basic explanation of concrete fasteners. Always refer to manufacturer's instructions or consult a contracting expert during any anchoring project.

Article Written By:
Mike Pistorino, Vice-President Operations

 

 

 

 


Concrete Fasteners, Inc. has over 40 years of experience selling concrete fasteners. We can ship out one box or a whole pallet of concrete anchors. Our products are of the highest quality... "your satisfaction is guaranteed". We ship all orders the same day the order is received.

Leave your comment