How to Install a Nylon Nail-It

How to Install Nylon Nail-Its

Purchase Nylon Nail-It Anchors

Installation

Nylon Nail-It Anchors can be installed into concrete, brick or block base material in four easy steps. These anchors are preassembled and ready to use, ensuring quick and accurate installation. This is a light duty fastener that is tamper and corrosion resistant.

Nail-It Tips & Tricks

  1. 1.Using a hammer drill and a properly sized carbide tipped drill bit, drill a hole in the base material 1/4” deeper than the expected embedment.
  2. Clean out the hole of all debris.
  3. Insert the anchor through the hole in the fixture and into the hole in the base material.
  4. Using a hammer, hit the nail into the anchor until the head of the nail is flush with the top of the anchor.