How to Install Hammer Drive Anchors

How to Install Hammer Drive Anchors

Purchase Hammer Drive Anchors

Installation Instructions

Installing Hammer Drive Anchors can be completed in four simple steps. Hammer Drive Anchors can be used in concrete, brick and block base materials, and are best suited for light duty fastening. Hammer Drive Anchors are available in 3/16” and 1/4" diameters, and up to 3” long. The hole diameter required for a Hammer Drive Anchor is equal to the diameter of the anchor. The Hammer Drive Anchor is tamper and corrosion resistant.

Installation Steps:

Dill hole using carbide tipped bit. Drill hole ¼” deeper than expected embedment depth.Insert metal hit anchor through fixture in to hole in base material.Using a hammer hit the nail into anchor until head is flush with top of anchor.
  1. Using a hammer drill and a properly sized carbide tipped drill bit, drill a hole in the base material 1/4” deeper than the expected embedment of the Hammer Drive Anchor.
  2. Clean out the hole of all debris.
  3. Insert the anchor through the hole in the fixture and into the hole in the base material.
  4. Using a hammer, hit the nail into the hammer drive anchor until the head is flush with the top of the anchor.