CONFAST® - 1/2" Machine Screw Anchor Set Tool
The 1/2" CONFAST® Machine Screw Anchor Setting Tool
is required for expanding the 1/2" Machine
Screw Anchor. The 1/2" CONFAST® Machine
Screw Anchor Setting Tool is in stock. All orders are shipped the same day
they are received.
- Anchor size equals setting tool size
- Each diameter machine screw anchor requires a different setting tool
- Setting tool is sold separately
- One setting tool can be used to set numerous machine screw anchors
- Zinc plated
Carbon Steel Zinc Plated
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in .
Diameter of Anchor
The diameter of the anchor is 1/2".
The anchor is packaged with 1 pieces per box .
Depth of Hole
The depth of the hole that is required for the anchor should be a minimum of 1/2" deeper than the anchor will penetrate the concrete. This will allow space for dust created during the installation process to fall, which will prevent the anchor from bottoming out in the hole before full penetration into the concrete.