Red Head - 1/2" X 5" Hex Tapcon+ Blue Climaseal ® Build America, Buy America (BABA) ICC-ESR-3699 (ea) TCPC-1250
These anchors come packaged with 15 pcs per box and are designed for fastening items to concrete.
- Bit size 1/2"
- Minimum embedment See PDF
- Do not use in vibratory loads
- 1/2" inch diameter x 5" inch long
- Spacing must be a minimum of 10 anchor diameters
Products specifications
| Bit Size |
1/2" |
| Minimum Embedment |
See PDF |
| Box Qty |
15 |
| Diameter |
1/2" |
| Length |
5" |
| Material |
Zinc Plated Climaseal® Blue |
| Environment |
Dry |
| Minimum Spacing |
See PDF |
| Minimum Edge Distance |
See PDF |
| Brand Name |
Red Head |
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Applications
The anchor is made from . This anchor is designed for use in
Environment
The anchor is designed for use in a dry environment.
Head Style
The anchor is a Hex Head head
Hole Diameter/Bit Diameter
The anchor requires a 1/2" hole to be drilled in the base material (). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Diameter of Anchor
The diameter of the anchor is 1/2".
Length Anchor
The length of the anchor is 5"
Depth of Hole
The depth of the hole that is required for the anchor should be a minimum of 1/2" deeper than the anchor will penetrate the concrete. This will allow space for dust created during the installation process to fall, which will prevent the anchor from bottoming out in the hole before full penetration into the concrete.
Installing a 1/2" X 5" Hex Tapcon+ Blue Climaseal ® Build America, Buy America (BABA) ICC-ESR-3699 (ea) TCPC-1250
- Drill a 1/2" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15.
- Drill the hole a 1/2" deeper than the anchor will penetrate the concrete, making sure the minimum embedment requirements of See PDF is met.
- Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb.
- Insert the point of the 1/2" X 5" Hex Tapcon+ Blue Climaseal ® Build America, Buy America (BABA) ICC-ESR-3699 (ea) TCPC-1250 into the hole.
- Turn the screw clockwise, applying slight pressure until the head of the screw is snug against the material being fastened.
- Always use proper personal protective equipment per manufacturer's and OSHA instructions.
BABA Data
