Concrete Anchors & Fasteners is Our Specialty   Questions? Contact Mike   

You have no items in your shopping cart.
Free Shipping
For orders $25
or more within
the USA

1/2" x 6-1/2" Simpson Strong-Tie Titen HD Screw Anchor 316 Stainless Steel, 20/Box

$472.08 per Box of 20
    Payment types
   Availability: In Stock
  Questions? Email Mike

SKU: THD50612H6SS MFG#: THD50612H6SS


Simpson Strong-Tie - 1/2" x 6-1/2" Simpson Strong-Tie Titen HD Screw Anchor 316 Stainless Steel

These anchors come packaged with 20 pcs per box and are designed for fastening items to concrete.

  • Bit size 1/2"
  • Minimum embedment See PDF
  • Zinc plated for indoor use
  • Do not use in vibratory loads
  • Packaged with zinc plated nuts and washers
  • 1/2" inch diameter x 6-1/2" inch long
  • Spacing must be a minimum of 10 anchor diameters
  • Free freight on all orders over $25.00
Products specifications
Bit Size 1/2"
Minimum Embedment 2"
Thread Type Undercut Design
2000 PSI Concrete - Pull-Out (lbs.) * 3580
2000 PSI Concrete - Shear (lbs.) * 2108
Type Male
Diameter 1/2"
Length 6-1/2"
Material 316 Stainless Steel
Environment Submerged/Chemicals
Box Qty 25
Minimum Spacing 8"
Minimum Edge Distance 5"
Maximum Fixture Thickness 3"
Minimum Fixture Hole Diameter (In Place) 9/16"
Minimum Fixture Hole Diameter (Hole Spotted) 9/16"
Length ID Code H
Wrench Size For Nut 3/4"
Head Type Hex Washer Serrated
Length Measurement Underneath head
Driver Size 3/4"
Brand Name Simpson Strong-Tie

Applications
The anchor is made from 316 Stainless Steel, and is 316 Stainless Steel. This anchor is designed for use in

Environment
The anchor is designed for use in a submerged/chemicals environment.

Head Style
The anchor is a Hex Washer Serrated head and is designed to allow the head to sit on top of the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 1/2" hole to be drilled in the base material. The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Driver Required
A 3/4" is required for driving the anchor into the base material.

Diameter of Anchor
The diameter of the anchor is 1/2".

Length Anchor
The length of the anchor is 6-1/2"

Packaging
The anchor is packaged with 20 pieces per box .

Depth of Hole
The depth of the hole that is required for the anchor should be a minimum of 1/2" deeper than the anchor will penetrate the concrete. This will allow space for dust created during the installation process to fall, which will prevent the anchor from bottoming out in the hole before full penetration into the concrete.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".

Wrench Size
The size of the wrench required to turn the nut to set the anchor is 3/4".

Torque Value
To be set properly in the concrete, the anchor must be torqued to between See PDF

*
*
*

Product/Company Reviews

* The figures above indicate average ultimate tension and shear failure values. A safety factor of 4:1 or 25% of ultimate value is generally accepted as a safe working load. Reference should always be made to applicable codes.



* The bits are recommended by diameter and may not necessarily be the length needed for your application. Please make sure the usable length will work for your application. *