JavaScript seems to be disabled in your browser.
You must have JavaScript enabled in your browser for full functionality of this website.
 

Concrete Anchors & Fasteners is Our Specialty   Questions? Email Mike   

You have no items in your shopping cart.
Free Shipping
For orders $25
or more within
the USA

1/4" x 2" Flat Slotted Sleeve Anchor Zinc Plated, 100/Box

   Availability: In Stock
  Questions? Email Mike

$45.00 per Box of 100
    Payment types
Need to purchase the 1/4" x 2" Flat Slotted Sleeve Anchor Zinc Plated? Buy direct to save. All orders ship immediately with no charge for freight.
SKU: SAF142
  MFG: CONFAST®

 

Customer Reviews

CONFAST® - 1/4" x 2" Flat Slotted Sleeve Anchor Zinc Plated

The 1/4" x 2" Flat Slotted Sleeve Anchor Zinc Plated are packaged 100 pieces per box and should be used in dry, indoor applications. The head is a flat countersunk style that is driven by using a standard slotted screwdriver. Every order is shipped the same day it is received, and will be delivered in 1 to 3 business days.

  • Bit size 1/4"
  • Minimum embedment 1"
  • Head is a flat countersunk
  • Standard screwdriver required to expand anchor
  • Preassembled and ready to install
  • Does not need bottom of hole for expansion
  • Three parts: body, sleeve, flat post nut
  • Easy and fast to install
  • 1/4" diameter x 2" (two inches) length (includes head, overall length)
  • $25.00 order qualifies for free freight
Products specifications
Bit Size 1/4"
Minimum Embedment 1"
Thread Type 3/16" - 24
2000 PSI Concrete - Pull-Out (lbs.) * 682
2000 PSI Concrete - Shear (lbs.) * 840
Type Male
Diameter 1/4"
Length 2"
Material Carbon Steel Zinc Plated
Environment Dry
Box Qty 100
Minimum Spacing 2-1/2"
Minimum Edge Distance 1-1/4"
Maximum Fixture Thickness 1"
Minimum Fixture Hole Diameter (In Place) 5/16"
Head Type Flat Countersunk
Length Measurement Overall length including head
Brand Name CONFAST®

Applications
The 1/4" x 2" (two inches) Flat Slotted Sleeve Anchor Zinc Plated is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in concrete, block, and brick.

Environment
The anchor is designed for use in an indoor, dry environment.

Head Style
The 1/4" x 2" (two inches) Flat Slotted Sleeve Anchor Zinc Plated is a Flat Countersunk head and is designed to prevent the head from protruding above the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 1/4" hole to be drilled in the base material (concrete, block, and brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the 1/4" x 2" (two inches) Flat Slotted Sleeve Anchor Zinc Plated is 1/4".

Length Anchor
The length of the anchor is 2" (two inches), and is measured as an overall length including the head.

Thread Type
The threads on the 1/4" x 2" (two inches) Flat Slotted Sleeve Anchor Zinc Plated are internal coarse threads that measures 3/16" with 24 threads per inch, commonly referred to as 3/16" - 24.

Packaging
The anchor is packaged with 100 pieces per box and comes assembled with flat countersunk post nut.

Minimum Embedment
The 1/4" x 2" (two inches) Flat Slotted Sleeve Anchor Zinc Plated minimum embedment into the concrete is 1". Therefore, the 1/4" x 2" (two inches) Flat Slotted Sleeve Anchor Zinc Plated must be installed so that a minimum of 1" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1". This will ensure that the minimum embedment of 1" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the 1/4" x 2" (two inches) Flat Slotted Sleeve Anchor Zinc Plated. The 1/4" diameter anchor requires the hole in the fixture to be 5/16".

Wrench Size
The size of the wrench required to turn the nut to set the anchor is flat screw driver.

Torque Value
To be set properly in the concrete, the 1/4" x 2" (two inches) Flat Slotted Sleeve Anchor Zinc Plated must be torqued to between 2 - 6 Ft./lbs.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 2-1/2" from each other when measured center to center.

Edge Distance
It is very important not to install the 1/4" x 2" (two inches) Flat Slotted Sleeve Anchor Zinc Plated any closer than 1-1/4" from an unsupported edge of concrete.

Holding Values - Ultimate Load Values in 2000 PSI Concrete

1/4" x 2" (two inches) Flat Slotted Sleeve Anchor Zinc Plated Size

Minimum Embedment

Pull-Out (lbs.)

Shear (lbs.)

1/4" x 2" (two inches)

1"

682

840


Product Information

Description

Part number

Quantity per Box

1/4" x 2" (two inches) Flat Slotted Sleeve Anchor Zinc Plated

SAF142

100

Installing a 1/4" x 2" (two inches) Flat Slotted Sleeve Anchor Zinc Plated
  1. Drill a 1/4" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15.
  2. Drill the hole a 1/2" deeper than the anchor will penetrate the concrete, making sure the minimum embedment requirements of 1" is met.
  3. The hole can be drilled while the fixture is in place. The minimum hole in the fixture for the 1/4" x 2" (two inches) Flat Slotted Sleeve Anchor Zinc Plated is 5/16".
  4. Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb.
  5. The 1/4" x 2" (two inches) Flat Slotted Sleeve Anchor Zinc Plated is manufactured and sold fully assembled with nut and washer. It is important that the nut is on the end of the threads to protect the threads when it is struck by a hammer during installation.
  6. Insert the anchor though the fixture hole and into the hole in the base material. A hammer will be required to pound the sleeve anchor into the base material until the washer and nut are tight against the fixture.
  7. Tighten the nut on the 1/4" x 2" (two inches) Flat Slotted Sleeve Anchor Zinc Plated until finger tight by turning clockwise.
  8. Using a flat screwdriver, turn the nut 2 to 4 times until snug or until the proper torque value of 2 - 6 Ft./lbs. is reached.
  9. Always use proper personal protective equipment per manufacturer's and OSHA instructions.

1/4" x 2" zinc plated flat head countersunk sleeve anchor - concrete - threshold 1/4" x 2" zinc plated flat head countersunk sleeve anchor - block - light fixture

*
*
*

* The figures above indicate average ultimate tension and shear failure values. A safety factor of 4:1 or 25% of ultimate value is generally accepted as a safe working load. Reference should always be made to applicable codes.



These bits work with the selected anchor
Back to product