TruCut - 5/32" x 5" SDS Tapcon® Bit
The 5/32" x 5" SDS Tapcon® Bit is for use with the quick disconnect chuck that featured on many modern hammer drills. The bit is not held in chuck solidly, but instead is allowed to slide back and forth like a piston. All orders ship from Cleveland, Ohio the same day they are received. Freight is free on all orders over $25.00.
- Bit Diameter 5/32"
- Overall length 5" (five inches)
- Usable length 3"
- For use quick disconnect SDS chucks
- Vacuum heat treated
- Diameter of bit meets ANSI standards B212.15
- Orders over $25.00 qualify for free freight