Sammys® 1/2" Vertical Threaded Rod Anchor for Wood, 1/2"-13 Rod Size, 1/4" x 3" Screw Size - GST 3 - 8015925, 25/Box

Sammys® 1/2" Vertical Rod Anchor for Wood, 1/2"-13 Rod Size, 1/4" x 3" Screw Size - GST 3 - 8015925

• One step installation process
• No predrilling required
• Reduces installation time and cost

• Threaded rod attachment
• Allows specifiers and designers to engineer systems with fewer attachment points
• Holds from 210-2275 lbs.

• Installs with SAMMYS Nut Driver
• Ensures correct installation torque
• Reduces occurrences of fastener failure due to over driving

Warranty requires the use of the appropriate nut driver for installations.

Installation

1. Insert the appropriate nut driver into a 3/8" or 1/2" portable drill.

2. Insert the Sammys® into the #14 (black) nut driver (p/n 8113910). Drill should be in a vertical position.

3. Push the face of the nut driver tight to the member. Begin installation when the nut driver spins freely on the Sammys®, stop drill and remove.

4. The Sammys® is now ready to receive 1/4", 3/8", 1/2" or metric all thread rod, bolt stock (The 1/2" requires the #14SW (red) nut driver).