Description
- Flat head
- Curved collation
- Type 410 stainless-steel screw has nibs under the head for easy countersinking
- 2-1/2 in. length has wings on the shaft to prevent jacking of the wood panel during installation
- #3 square drive (replacement bit BIT3S)
- Type 410 stainless steel is coated for additional corrosion protection
- Quantity: 1,000
- Clear zinc coating
Products specifications
| Box Qty | 1000 |
| Diameter | #10 |
| Length | 1-1/2" |
| Material | 410 Stainless Steel |
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
The information on this page is intended for preliminary guidance only. For complete safety and to verify accurate information, please consult the (PDF linked below) to obtain the manufacturer’s values when selecting the anchors for your project.
Use this screw for wood or wood structural panel sheathing to cold-formed steel (recommended max. steel thickness: 3/16”).
Fastener Product Information, page 208
Product Information (on Simpson Website)
California Prop 65 WARNING! Cancer -www.P65Warnings.ca.gov
