Description
- Curved collation
- Rimmed flat head with nibs for easy countersinking
- #2 square drive (driver bit in each box; replacement bit model BIT2S)
- High-low threads
- Sharp point
- 1:1 replacement for 8d common nails when used with floor sheathing 15/32–23/32 in. thick
- Length: 1-3/4 in.
- Gray phosphate coating is recommended for dry, low-corrosion environments
- Quantity: 2,000
| Box Qty | 2000 |
| Diameter | #7 |
| Length | 1-3/4" |
| Material | Gray Phosphate Coating |
The information on this page is intended for preliminary guidance only. For complete safety and to verify accurate information, please consult the (PDF linked below) to obtain the manufacturer’s values when selecting the anchors for your project.
The WSHL is designed to work with the Simpson Strong-Tie® Quik Drive® auto-feed screw driving system. This screw is ideal for securely fastening subfloor panels to floor joists. The Quik Drive system features non-skid teeth that provide increased stability resulting in uniform toenailing and countersink on slick surfaces.
Fastener Product Information, page 194
Product Information (on Simpson Website)
Package information
14.13 in. x 4.81 in. x 10.38 in., 12.2 lbs.
California Prop 65 WARNING! Cancer -www.P65Warnings.ca.gov
