JavaScript seems to be disabled in your browser.
You must have JavaScript enabled in your browser for full functionality of this website.
 

Concrete Anchors & Fasteners is Our Specialty   Questions? Contact Mike   

You have no items in your shopping cart.
Free Shipping
For orders $25
or more within
the USA

1/4" x 2" Nylon Nail-It Flat Head, 100/Box

   Availability: In Stock
  Questions? Email Mike

$15.00 per Box of 100
    Payment types
Purchase the 1/4" x 2" Nylon Nail-It Flat Head direct for highest quality and savings. Each order ships freight free.
SKU: NNF142
  MFG: CONFAST® , CONFAST®

 

Customer Reviews

CONFAST® - 1/4" x 2" Nylon Nail-It Flat Head

The CONFAST® 1/4" x 2" Nylon Nail-It Flat Head it is a light duty masonry anchor that has a flat countersunk head and is suitable for most masonry base materials. Packaged 100 pieces per box, they ready to install and come fully assembled. Free freight on all orders over $25.00; all orders ship the same day they are received.

  • Bit size 1/4"
  • Minimum embedment 3/4"
  • Zinc plated nail
  • Rush resistant nylon body
  • Driving nail expands the anchor
  • Countersunk head of anchor sets flush with surface
  • Works well in vibratory loads
  • Simple to install, drill hole then drive the nail
  • All orders over $25.00 ship freight free
Products specifications
Bit Size 1/4"
Minimum Embedment 3/4"
2000 PSI Concrete - Pull-Out (lbs.) * 165
2000 PSI Concrete - Shear (lbs.) * 240
Type Male
Diameter 1/4"
Length 2"
Material Nylon Body -Carbon Steel Zinc Plated Nail
Environment Dry
Box Qty 100
Minimum Spacing 2-1/2"
Minimum Edge Distance 1-1/4"
Maximum Fixture Thickness 1-1/4"
Minimum Fixture Hole Diameter (In Place) 5/16"
Minimum Fixture Hole Diameter (Hole Spotted) 5/16"
Head Type Flat Countersunk
Length Measurement Overall length including head
Brand Name CONFAST®

Applications
The 1/4" x 2" (two inches) Nylon Nail-It Flat Head is made from Nylon Body with a Zinc Plated Nail. This anchor is designed for use in concrete, block, and brick.

Environment
The anchor is designed for use in an indoor, dry environment.

Head Style
The 1/4" x 2" (two inches) Nylon Nail-It Flat Head is a Flat Countersunk head and is designed to prevent the head from protruding above the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 1/4" hole to be drilled in the base material (concrete, block, and brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the 1/4" x 2" (two inches) Nylon Nail-It Flat Head is 1/4".

Length Anchor
The length of the anchor is 2" (two inches), and is measured as an overall length including the head.

Packaging
The 1/4" x 2" (two inches) Nylon Nail-It Flat Head is packaged with 100 pieces per box.

Minimum Embedment
The anchor minimum embedment into the concrete is 3/4". Therefore, the anchor must be installed so that a minimum of 3/4" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a 1/4" x 2" (two inches) Nylon Nail-It Flat Head is 1-1/4". This will ensure that the minimum embedment of 3/4" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor . The 1/4" diameter anchor requires the hole in the fixture to be 5/16".

Spacing between Anchors
Each 1/4" x 2" (two inches) Nylon Nail-It Flat Head must be spaced a minimum distance of 2-1/2" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 1-1/4" from an unsupported edge of concrete.

Holding Values - Ultimate Load Values in 2000 PSI Concrete

1/4" x 2" (two inches) Nylon Nail-It Flat Head Size

Minimum Embedment

Pull-Out (lbs.)

Shear (lbs.)

1/4" x 2" (two inches)

3/4"

165

240


Product Information

Description

Part number

Quantity per Box

1/4" x 2" (two inches) Nylon Nail-It Flat Head

NNF142

100

*
*
*

* The figures above indicate average ultimate tension and shear failure values. A safety factor of 4:1 or 25% of ultimate value is generally accepted as a safe working load. Reference should always be made to applicable codes.



These bits work with the selected anchor
Back to product