The CONFAST® 304 Stainless Steel Acorn Head Sleeve Anchor is a very specialized masonry anchor that is available in only one diameter and in two lengths.
Both sizes always in stock
Ships immediately from Cleveland, Ohio
Completely assembled and ready for installation
Each box contains 100 pieces
Product Information - CONFAST® 304 Stainless Steel Acorn Head Sleeve Anchor
304 stainless steel is suitable for use in moist wet atmospheres
304 stainless steel acorn head is an open acorn, allowing the stud to protrude through it during the installation process
Lengths available: 1-3/8" and 2-1/4"
The CONFAST® 304 Stainless Steel Acorn Head Sleeve Anchor can be installed in most masonry materials
Turning the acorn nut on the CONFAST® 304 Stainless Steel Acorn Head Sleeve Anchor clockwise pulls the stud up, expanding the sleeve
Hole size is 1/4"
Finding the correct CONFAST® 304 Stainless Steel Acorn Head Sleeve Anchor
Enter the product number in the search box
CONFAST® 304 Stainless Steel Acorn Head Sleeve Anchor part number starts with four letters, "SAAS", standing for "Sleeve Anchor Acorn Stainless"
The first two numbers are the diameter ("14" refers to "1/4") and the last three numbers refer to the length ("138" stands for 1-3/8")
Go to the product list and click the item
Technical Information - provides technical information on all diameters of sleeve anchors
