CONFAST® Round Head Split Drive Anchor will fasten to solid concrete, and should never be used in other masonry materials such as brick or block.
Every size in stock for immediate shipment
Free freight on all orders over $50
One diameter
Four different lengths
Tamper resistant
Order online and save
Product Information - CONFAST® Round Head Split Drive Anchor
Concrete
Round head allows the anchor to be used when the head of the fasteners sits on top of the surface of the item being fastened
Manufactured in one diameter of 1/4"
Length is measured from underneath the head
1/4" diameter bit is required for drilling the hole in the concrete
Once installed, the CONFAST® Round Head Split Drive Anchor cannot be removed
Zinc plated for dry indoor environments
Once hole is drilled in the concrete, drive the CONFAST® Round Head Split Drive Anchor by using a hammer until the head is tight against the item being fastened
Must be installed a minimum of 10 anchor diameters, or 2-1/2", away from each other
Item Number
The item number starts with "SDR", which stands for "Split Drive Round"
The first two numbers represent the diameter, i.e. (14) is 1/4"
The last numbers represent the length, i.e. (112) is 1-1/2"
Product Page - each item has its own product page that contains complete technical and ordering information.
Add number of boxes needed using the simple shopping cart
Free same day shipping - click on the link
Questions: Email Mike, who is ready to help with explanations and information
