The CONFAST® Strike Anchor should only be used in dry environments and in solid concrete. They should never be installed in hollow base material, such a brick or block (CMU).
All orders over $50.00 earn free freight
In stock for shipment upon ordering - expect delivery in 1 to 3 business days
Packaged with nuts and washer
Yellow zinc plated for rust resistance
Large selection
Not manufactured in stainless steel
7/8" and 1" diameters are not available
CONFAST® Strike Anchor - Product information
Six diameters are available that range from 1/4" to 3/4"
Anchor diameter is equal to hole or bit diameter
Inspection-friendly installment since the head of the nail meets the anchor body
Nut does not expand the anchor
Set nut for desired embedment of anchor
Hardened pin for maximum positive expansion
Item # Nomenclature:
The first two letters of "SA" refer to "Strike Anchor"
The next two or three numbers represent the diameter of the CONFAST® Strike Anchor, i.e. (516) for 5/16" and (34) for 3/4"
The numbers following the diameter refer to the length of the anchor, i.e. (312) equals 3-1/2"
Product List - this list has all the CONFAST® Strike Anchors from the smallest diameter to the largest. Each diameter is in order from the shortest length to the longest length.
