• Customer Reviews

Domestic American Made Drop-In Anchors

Published by Robert Carlisle on Dec 3rd 2012

Purchase Drop In Anchors

Concrete Fasteners manufactures drop-in anchors in the United States and uses steel melted in America. Our domestic drop-in anchors meet ARRA (American Recovery and Reinvestment Act) requirements, and can be made from carbon steel, 304 or 316 stainless steel.

Ordering
Our online drop-in anchors are not domestic. To order the domestic drop-in anchors please call Mike at 216-357-7433.  All paperwork, including material certification and manufacturing certification, is provided after a written purchase order has been received.

Preassembled
The drop-in anchor comes preassembled with the internal expansion plug securely held in place and ready for installation.

Base Material
Drop-in anchors should only be used in solid base materials, such as concrete.  They should never be used in base materials like brick, block or stone.

Design
Drop-in anchors are designed for overhead applications to provide maximum holding power and ease of installation.  The internal plug is manufactured to allow for maximum expansion of the anchor as well as a positive structure to ensure increased expansion if tension is increased.

Types
American-made domestic drop-in anchors are made from three different types of materials: carbon steel that is zinc plated, 304 stainless steel or 316 stainless steel.

Designated Size
Drop-in anchors are manufactured in five different diameters.  The designated diameter of the drop-in anchor refers to the inside diameter or size of bolt that can be inserted into the anchor.  (See Chart A.)

Hole Size
The diameter of the hole that needs to be drilled in the concrete is equal to the outside diameter of the anchor.  (See Chart A.)

Anchor Length
Each diameter of anchor comes in only one length, as the diameter of the anchor gets larger the length of the anchor gets longer. (See Chart A.)

Threads
The internal threads of each anchor are national coarse threads and are about equal to half the overall length of the anchor.  (See Chart A.)

CHART A

 

Size

Hole Size

Anchor Length

Threads Length

1/4”

3/8”

1”

1/2”

3/8”

1/2”

1-9/16

5/8”

1/2”

5/8”

2”

3/4”

5/8”

3/4”

2-9/16”

1”

3/4”

1”

3-3/16”

1-1/4”




Setting Tool
Each diameter of drop-in anchor has a corresponding setting tool that is sold separately.
Diameter of Drop-In Anchor Anchor Part Number Setting Tool Part Number

Diameter of Drop-In Anchor

Anchor Part Number

Setting Tool Part Number

1/4”

DI14

DIST14

3/8”

DI38

DIST38

1/2”

DI12

DIST12

5/8”

DI58

DIST58

3/4”

DI34

DIST34



Packaging
Each size of drop-in anchors is packaged in different box quantities as well as in different case quantities.
Anchor Box Quantity Case Quantity

 

Anchor

Box Quantity

Case Quantity

1/4”

100

1000

3/8”

50

500

1/2”

50

500

5/8”

25

250

3/4”

25

125

 

Installation

The installation of the drop-in anchor is fast and easy:

  • Drill hole in concrete to a depth of 1/8” deeper than the length of drop-in being installed.
  • Clean hole
  • Insert drop-in anchor with threaded open end up towards the surface of the concrete.
  • Insert the properly sized setting tool into the drop-in anchor and strike with a hammer until the internal plug is fully set.

 

Purchase Drop In Anchors