Sammys® 3/8" Horizontal Threaded Rod Anchor for Steel, 3/8"-16 Rod Size, #12-24 x 1-1/2" Screw Size - SWDR 1.5 - 8054957, 25/Box

Sammys® 3/8" Horizontal Rod Anchor for Steel, 3/8"-16 Rod Size, #12-24 x 1-1/2" Screw Size - SWDR 1.5 - 8054957

• One step installation process
• No predrilling required
• Reduces installation time and cost

• 96 degree attachment angle
• Attaches to the side of wood elements
• Provides more attachment locations for designers and specifiers

• Installs with SAMMYS Nut Driver
• Ensures correct installation torque
• Reduces occurrences of fastener failure due to over driving

Warranty requires the use of the appropriate nut driver for installations.

Installation

1. Insert the appropriate nut driver into a 3/8" or 1/2" portable drill.

2. Insert the Sammys® into the #14SW (red) nut driver (p/n 8114910). With drill unit in a horizontal position and at a right angle to the structural member, begin installation.

3. When the nut driver spins freely on the Sammys®, stop the drill and remove.

4. The unit is now ready to receive 1/4", 3/8", M10, M8 or metric all thread rod or bolt stock.

Note: When installing SWDR, follow the above instructions, then add retainer nut and torque to 20 foot lbs. for maximum pullout in purlin steel.