Description
- 0.375-in. ribbed wafer head with nibs for easy countersinking
- #3 undersized square drive (2 driver bits in each box; replacement bit model BIT3SU)
- Coarse threads
- Type-17 point
- C-3 mechanically galvanized coating
- Straight collation
- Size: #10 x 1-1/4 in.
- Quantity: 1,500
Products specifications
| Box Qty | 1500 |
| Diameter | #10 |
| Length | 1-1/4" |
| Material | Mechanically Galvanized, C-3 |
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
The information on this page is intended for preliminary guidance only. For complete safety and to verify accurate information, please consult the (PDF linked below) to obtain the manufacturer’s values when selecting the anchors for your project.
"The CB3BLG is designed for dense fiber-cement-to-wood applications. This collated screw is used with the Quik Drive® PROLDHG2 underlayment/backerboard system. The coarse-threaded CB3BLG screw features a design ideal for countersinking to provide a clean, concealed finish."
Head Diameter: 0.383 inches
Product Information (on Simpson Website)
Package information
14.13 in. x 3.81 in. x 10.38 in., 12.4 lbs.
California Prop 65 WARNING! Cancer -www.P65Warnings.ca.gov
