Description
- 0.375-in. ribbed wafer head with nibs for easy countersinking
- #3 undersized square drive (2 driver bits in each box; replacement bit model BIT3SU)
- Alternating high-low threads
- Sharp point
- C-3 mechanically galvanized coating
- Straight collation
- Size: #9 x 1-1/4 in.
- Quantity: 1,500
Products specifications
| Box Qty | 1500 |
| Diameter | #9 |
| Length | 1-1/4" |
| Material | Mechanically Galvanized, C-3 |
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
The information on this page is intended for preliminary guidance only. For complete safety and to verify accurate information, please consult the (PDF linked below) to obtain the manufacturer’s values when selecting the anchors for your project.
"The CB3BLGHL is designed for cement-board-to-wood applications (for coarse, porous, and softer materials). This collated screw is used with the Quik Drive® PROLDHG2 underlayment/backerboard system. The coarse-threaded CB3BLG screw features a design ideal for countersinking to provide a clean, concealed finish."
Product Information (on Simpson Website)
California Prop 65 WARNING! Cancer -www.P65Warnings.ca.gov
