Description
- Trim head with nibs for easy countersinking
- #2 square drive
- Driver bit in each box
- High-low threads
- Sharp point
- Curved collation
- Yellow zinc coatings are applied in accordance with ASTM F1941
- Quantity: 2,500
| Box Qty | 2500 |
| Diameter | #7 |
| Length | 1" |
| Material | Yellow-Zinc Coated |
The information on this page is intended for preliminary guidance only. For complete safety and to verify accurate information, please consult the (PDF linked below) to obtain the manufacturer’s values when selecting the anchors for your project.
"The MTH Underlayment screw is designed for fast and secure underlayment to subfloor installations. Unlike nails, the MTH Underlayment screw has an intricate thread pattern designed to prevent squeaking by holding underlayment tight to the subfloor and thus preventing pull-out. Its compact trim-head allows for a flush surface and prevents floor coverings from settling in countersink recesses."
Fastener Product Information, page 195
Product Information (on Simpson Website)
California Prop 65 WARNING! Cancer -www.P65Warnings.ca.gov
