CONFAST® Wedge Anchors

(Showing 12 of 149)

CONFAST® Wedge Anchors are designed to be used in solid concrete. They should never be used in porous, hollow materials, such as brick or CMU block. The CONFAST® Wedge Anchors are manufactured from different types of materials and coatings for installation in a range of environments. The wide choice of diameters available allow the CONFAST® Wedge Anchor to be used in applications varying from light to heavy duty. The Wedge Anchor has the most consistent holding values in solid concrete than all other types of expansion anchors. The expansion clip that is permanently attached to the CONFAST® Wedge Anchor is made from the same grade of material as the anchor body, with the exception of the galvanized, which has a 304 stainless steel clip.

Four different types of CONFAST® Wedge Anchors to choose from:

Zinc Plated Carbon Steel - for indoor applications where moisture is not present
Galvanized Carbon Steel - used in outdoor applications where moisture is present
304 Stainless Steel - designed for wet/submerged outdoor applications
316 Stainless Steel - primarily used in applications where certain chemicals may be present

Additional Information

CONFAST® Wedge Anchors - Product Information
For use in solid concrete
Provides most consistent holding value in solid concrete over other expansion type anchors
Packaged with nuts and washers
Length measured end to end
Hole or the bit size is equal to anchor diameter size
Minimum embedment requirements per diameter
Spacing and edge distance requirements per diameter
Each anchor is stamped with a length identification code
Maximum torque for each diameter
Length of threads differs from diameter and length of anchor
Galvanized CONFAST® Wedge Anchors are manufactured with a 304 stainless steel clip
304 Stainless Steel CONFAST® Wedge Anchor has a 304 stainless steel clip; the 316 stainless steel CONFAST® Wedge Anchor have a 316 stainless steel clip permanently attached.
The CONFAST® Wedge Anchor

Every diameter and length of CONFAST® Wedge Anchors in stock
All orders ship immediately
Free freight on all orders over $100.00 shipped in the continental United States
Technical Information
For information and technical specification, click on the blue link "TECHNICAL INFORMATION". This page displays the technical specifications for the CONFAST® Wedge Anchors.

Determining length of CONFAST® Wedge Anchor required
Spacing requirements
Holding values in 2000 PSI concrete
Thread length
Minimum embedment
Torque Values
Installation

Click on the installation link to view a short video that describes the steps to install the CONFAST® Wedge Anchor. Written step-by-step instructions are also included.
Choosing the CONFAST® Wedge Anchors

Filter by Attributes

Click on the diameter and select the diameter required
Find the length available, then choose the preferred length
Select the type of material: carbon steel, galvanized, 304 or 316 stainless steel

Go to Product List

This list displays every CONFAST® Wedge Anchor available
Scroll through the list and click on the item number (SKU) or description, then go to the individual product page